3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
962
C
HAPTER
68: C
ONGESTION
M
ANAGEMENT
Configuring maximum queue length
Configure maximum queue length and the drop type is tail drop.
Perform the following in Traffic Behavior View.
This command can be used only after the
queue af
command and
queue wfq
command have been configured.
Execute the
undo queue af
command and
undo queue wfq
command, then
queue-length
will be deleted as well.
For the default-class, this command can be used only after the
queue af
or
queue
wfq
command has been configured.
Configuring the drop type as random
Perform the following in Traffic Behavior View.
dscp
indicates that the dscp value is used to calculate drop proportion of a packet.
ip-precedence
indicates that the IP precedence value is used to calculate discard
proportion of a packet, which is the default setting.
This command can be used only after the
queue af
command and
queue wfq
command have been configured. The
wred
and
queue-length
are mutually
exclusive. Other configurations under the random drop will be deleted when this
command is deleted. When a QoS policy included WRED is applied on an
interface, the original WRED configuration on interface will be ineffective.
command is deleted. When a QoS policy included WRED is applied on an
interface, the original WRED configuration on interface will be ineffective.
The default-class can only be associated with the traffic behavior configured the
random drop based on the IP precedence.
random drop based on the IP precedence.
Configuring exponential of average queue length calculated by WRED
Perform the following in Traffic Behavior View.
This command can be used only after the
queue af
command has been
configured and the
wred
command has been used to enable WRED
Table 1039 Configuring maximum queue length
Operation
Command
Configure maximum queue length
queue-length queue-length
Delete the configuration
undo queue-length queue-length
Table 1040 Configuring the discarding mode as random
Operation
Command
Configure the discarding mode as random
wred [ dscp | ip-precedence ]
Restore the default setting
undo wred [ dscp | ip-precedence ]
Table 1041 Configuring exponential of average queue length calculated by WRED
Operation
Command
Configure exponential of average queue
length calculated by WRED
length calculated by WRED
wred weighting-constant exponent
Delete the configuration
undo wred weighting-constant