3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
73
Command Reference
fragment
Use the
fragment
command to enable the FRF.12-compliant fragmentation function on frame relay virtual
circuit.
Frame Relay Class view
frame-format
Use the
frame-format
command to set the frame format of ATM OC-3c/STM-1 interface.
ATM Interface view
frame-format
Use the
frame-format
command to configure the ATM over E1/T1 framing format.
ATM E1/T1 Interface view
frame-format
Use the
frame-format
command to configure frame format of ATM E3/T3 interface.
ATM E3/T3 Interface view
frame-format
Use the
frame-format
command to set the frame type of the CPOS interface.
CPOS Interface view
frame-format
Use the
frame-format
command to set the frame format of the POS interface.
POS Interface view
frame-format (CE1/PRI Interface)
Use the
frame-format
command to set the frame format on the CE1 interface.
CE1/PRI Interface view
frame-format (CT1/PRI Interface)
Use the
frame-format
command to set the frame format on the CT1/PRI interface.
CT1/PRI Interface view
frame-format (CT3 Interface)
Use the
frame-format
command to configure the frame format used by the CT3 interface.
CT3 Interface view
frame-length
Use the
frame-length
command to configure the number of ATM cells in an IMA frame.
IMA Group Interface view
framefill none
Use the
framefill none
command to disable a serial interface to send interframe filling tags.
Synchronous Serial Interface view
Asynchronous Serial Interface view
AUX Interface view
AM Interface view
free unused porttag
Use the
free unused porttag
command to release the port tag resources used by removed interfaces for
creating new interfaces.
System view
free user-interface
Use the
free user-interface
number
command to disconnect the user corresponding to the user
interface specified by its absolute index.
User view
frequency
Use the
frequency
command to configure an automatic test interval.
HWPing Test Group view
ft1 alarm-threshold
Use the
alarm-threshold
command to configure the alarm thresholds on the T1-F interface as needed.
T1-F Interface view
ft1 bert (T1-F Interface)
Use the
ft1 bert
command to start a BERT test on the T1-F interface.
T1-F Interface view
ft1 cable
Use the
ft1 cable
command to configure attenuation or transmission segment matching the T1-F interface.
T1-F Interface view