3com 5012 Manual De Usuario
74
3Com Router 5000/6000 Family
Command Reference
ft1 clock
Use the
ft1 clock
command to configure clocking on the T1-F interface.
T1-F Interface view
ft1 code
Use the
ft1 code
command to configure line code format for a T1-F interface.
T1-F Interface view
ft1 data-coding
Use the
ft1 data-coding normal
command to disable user data inversion on the T1-F interface.
Use the
ft1 data-coding inverted
command to enable user data inversion on the CT1/PRI interface.
T1-F Interface view
ft1 fdl
Use the
ft1 fdl
command to set the behavior of the T1-F interface on the FDL in ESF framing.
T1-F Interface view
ft1 loopback
Use the
ft1 loopback
command to place the T1-F interface in local or remote loopback.
T1-F Interface view
ft1 sendloopcode
Use the
sendloopcode
command to send remote loopback control code.
T1-F Interface view
ft1 timeslot-list
Use the
ft1 timeslot-list
command to bundle timeslots on the T1-F interface.
T1-F Interface view
ft3 (CT3 Interface)
Use the
ft3
command to configure the CT3 interface to operate in FT3 mode and to set the DSU mode and
subrate for FT3.
CT3 Interface view
ftp
Use the
ftp
command to set up control connection to the remote FTP server and enter FTP client view.
User view
ftphost source-interface
Use the
ftp
host
source-interface
command to specify the source interface that the FTP client uses
when accessing the specified FTP server. This interface must be an exiting local interface.
User view
ftphost source-ip
Use the
ftp
host
source-ip
command to specify the source IP address that the FTP client uses when
accessing the specified FTP server.
User view
ftp-operation
Use the
ftp-operation
command to configure the FTP operation done by the system.
HWPing Test Group view
ftp server enable
Use the
ftp server enable
command to enable the FTP server to allow login of FTP users.
System view
ftp-server source-interface
Use the
ftp-server source-interface
command to specify a source interface, which must be an existing
local interface, for the FTP server.
System view
ftp-server source-ip
Use the
ftp-server source-ip
command to specify a source IP address for the packets sent by the FTP
server. This IP address must be a local IP address.
System view
ftp source-interface
Use the
ftp source-interface
command to specify a source interface, which must be an existing local
interface, for the FTP client.
System view
ftp source-ip
Use the
ftp source-ip
command to specify a source IP address for the packets sent by the FTP client.
This IP address must be a local IP address.
System view