3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
83
Command Reference
interface loopback
Use the
interface loopback
command to create a loopback interface or its view.
System view
interface mfr
Use the
interface mfr
command to create a multilink frame relay bundle interface or sub-interface and
enter the corresponding interface view.
System view
interface mp-group
Use the
interface mp-group
wcommand to create an MP-group interface.
System view
interface null
Use the
interface null
command to enter null interface view.
System view
interface serial [ p2p | p2mp ]
Use the
interface serial
[ p2p | p2mp ]
command to configure type of the specified FR subinterface
and enter frame relay subinterface view.
System view
interface tunnel
Use the
interface tunnel
command to create a tunnel interface and enter the view of this tunnel interface.
System view
interface virtual-ethernet
Use the
interface virtual-ethernet
command to create a virtual Ethernet interface.
System view
interface virtual-template
Use the
interface virtual-template
command to create a virtual template or enter the existing virtual
template view.
System view
interval-time
Use the
interval-time
command to configure the interval for triggering DPD query.
DPD Structure view
invert receive-clock
Use the
invert receive-clock
command to invert the receive-clock signal on the DTE-side synchronous
serial interface.
Serial Interface View
invert transmit-clock
Use the
invert transmit-clock
command to enable the inverting of the transmit-clock signal of the
synchronous serial interface at the DTE side.
Serial Interface view
ip
Use the
ip
command to specify the IP address of an entity.
PKI Entity view
ip address
Use the
ip address
command to configure the home address of an MR.
HA-MR view
ip address
Use the
ip address
command to set an IP address for an interface.
Interface view
ip address
Use the
ip address
command to configure the home address of an MR.
MR view
ip address bootp-alloc
Use the
ip address bootp-alloc
command to configure the Ethernet interface to obtain IP address using
BOOTP.
Ethernet Interface view
ip address dhcp-alloc
Use the
ip address dhcp-alloc
command to enable DHCP client on the Ethernet or WAN interface for
obtaining local IP address.
Interface view (Ethernet Interface or Subinterface)
Synchronous/Asynchronous Serial Interface (encapsulated with PPP, HDLC, or frame relay, E1 interface)