3com 5012 Manual De Usuario
84
3Com Router 5000/6000 Family
Command Reference
ip address ppp-negotiate
Use the
ip address ppp-negotiate
command to allow IP address be assigned through negotiation at the
interface.
Interface view
ip address unnumbered
Use the
ip address unnumbered
command to enable an interface to borrow the IP address of another
interface.
Interface view
ip as-path-acl
Use the
ip as-path-acl
command to configure an AS path regular expression.
System view
ip binding vpn-instance
Use the
ip binding vpn-instance
command to bind an interface or subinterface to a vpn-instance.
Interface (or Subinterface) view
ip community-list
Use the
ip community-list
command to configure a BGP community list.
System view
ip count enable
Use the
ip count enable
command to enable IP accounting.
System view
ip count exterior threshold
Use the
ip count exterior-threshold
command to configure maximum number of entries in the exterior
hash table, with each entry for an IP packet that does not match any IP accounting rule.
System view
ip count firewall denied
Use the
ip count firewall-denied
command to configure the IP Accounting to count the IP packets
denied by the firewall on the current interface.
Interface view
ip count inbound packets
Use the
ip count inbound-packets
command to configure the IP Accounting to count inbound IP packets
on the current interface.
Interface view
ip count interior threshold
Use the
ip count interior-threshold
command to configure maximum number of entries in the interior
hash table, with each entry for an IP packet matching the IP accounting rule.
System view
ip count outbound-packets
Use the
ip count outbound-packets
command to configure the IP Accounting to count outbound IP
packets on the current interface.
Interface view
ip count rule
Use the
ip count rule
command to configure IP accounting rules.
System view
ip count timeout
Use the
ip count timeout
command to configure the aging time of IP accounting entries.
System view
ip df-check enable
Use the
ip df-check enable
command to enable don’t fragment bit (DF-bit) check for IP packets.
System view
ip-dscp
Use the
ip-dscp
command to configure the PVC to carry packets of the specified priority levels when the
DSCP identifier in the IP packet is used to identify the priority levels of packets.
ATM Pvc-Group view