3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
85
Command Reference
ip fast-forwarding
Use the
ip fast-forwarding
command to enable unicast fast packet forwarding on both inbound and
outbound interfaces.
Use the
ip fast-forwarding
inbound command to enable unicast fast packet forwarding on the inbound
interface.
Use the
ip fast-forwarding
outbound command to enable unicast fast packet forwarding on the outbound
interface.
Interface view
ip forward-broadcast
Use the
ip forward-broadcast
command to enable the current interface to forward broadcasts.
Interface view
ip host
Use the
ip host
command to configure the IP address corresponding to a host name.
System view
ip ip-prefix
Use the
ip ip-prefix
command to configure an address prefix list or one of its items.
System view
ip local policy route-policy
Use the
ip local policy route-policy
command to enable local policy routing.
System view
ip multicast-fast-forwarding
Use the
ip multicast-fast-forwarding
command to enable multicast fast forwarding on an interface.
Interface view
ip multicast-policy route-policy
Use the
ip multicast-policy route-policy
command to enable a multicast policy routing on an
interface.
Interface view
ip netstream aggregation
Use the
ip netstream aggregation
command to enter NetStream aggregation view.
System view
ip netstream export host
Use the
ip netstream export host
command to set the destination IP address and UDP port number for
NetStream UDP packets.
System view,
NetStream Aggregation view
ip netstream export source
Use the
ip netstream export source
command to configure a source interface for NetStream UDP
packets.
System view,
NetStream Aggregation view
ip netstream export version
Use the
ip netstream export version
command to configure the type of AS numbers to be recorded in
NetStream cache entries and the version of UDP packets.
System view
ip netstream format no-direction
Use the
ip netstream format no-direction
command to remove flow direction mark in the header of
NetStream log packet.
System view
ip netstream { inbound | outbound }
Use the
ip netstream
{ inbound | outbound }
command to enable NetStream statistics in the inbound
or outbound direction of the interface.
Interface view
ip netstream max-entry
Use the
ip netstream max-entry
command to set the NetStream cache size.
System view
ip netstream timeout active
Use the
ip netstream timeout active
command to set the active aging timer for NetStream cache entries.
System view