3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
87
Command Reference
ip vpn-instance
Use the
ip vpn-instance
command to create and configure a vpn-instance.
Use the
ip vpn-instance
command to create a vpn-instance named vpn-name.
System view
Routing Protocol (BGP and RIP) view
ipsec card-proposal
Use the
ipsec card-proposal
command to create an SA proposal for the encryption card and enter the
corresponding view.
System view
ipsec policy (Interface view)
Use the
ipsec policy
(Interface view) command to apply an ipsec policy group with the name
policy-name
at the interface,.
Interface view
ipsec policy (System view)
Use the
ipsec policy
command to establish or modify an ipsec policy, and enter IPSec policy view.
System view
ipsec policy-template
Use the
ipsec policy-template
command to establish or modify an IPSec policy template, and enter
IPSec policy template view.
System view
ipsec proposal
Use the
ipsec proposal
proposal-name command to establish or modify a proposal named
proposal-name
, and enter IPSec proposal view.
System view
ipsec sa global-duration
Use the
ipsec sa global-duration
command to set a global SA duration.
System view
ipv4-family
Use the
ipv4-family
command to enter IPv4 extended address family view of BGP.
Use the
ipv4-family multicast
command to multicast. For relevant contents, refer to "MBGP Multicast
Extended" chapter in module "Multicast" of this manual.
Use the
ipv4-family vpn-instance
command for BGP/MPLS VPN. For related description, refer to "MPLS
VPN" chapter in module "MPLS" module of this manual.
BGP view
VPN Instance view
ipv4-family
Use the
ipv4-family multicast
command to enter MBGP multicast address family view.
Use the
ipv4-family vpn-instance
command to enter MBGP vpn-instance address family view.
Use the
ipv4-family vpnv4
command to enter MBGP VPNv4 address family view.
BGP view
ipv4-family multicast
Use the
ipv4-family multicast
command to enter the IPv4 multicast subaddress family view.
BGP view
ipv4-family vpn-instance
Use the
ipv4-family
command to enter MBGP address family view of RIP.
RIP view
ipv4-family vpnv4
Use the
ipv4-family vpnv4
command to enter VPNv4 address family view of BGP.
BGP view
idle-mark
Use the
idle-mark
command to configure the idle coding scheme of the synchronous serial port.
Synchronous Serial Interface view
ipx enable
Use the
ipx enable
command to activate IPX.
System view
ipx encapsulation
Use the
ipx encapsulation
command to set IPX frame encapsulation format on Ethernet interface.
Ethernet Interface view