3com 5012 Manual De Usuario
86
3Com Router 5000/6000 Family
Command Reference
ip netstream timeout inactive
Use the
ip netstream timeout inactive
command to set the inactive aging timer for NetStream cache
entries.
System view
ip option source-routing
Use the
ip option source-routing
command to enable IP source routing, allowing the router to handle
the packets with the IP source-route option.
System view
ip policy route-policy
Use the
ip policy route-policy
command to enable policy routing at an interface.
Interface view
ip pool
Use the
ip pool
command to configure a local address pool for assigning addresses to PPP users.
System view
ISP Domain view
ip-precedence
Use the
ip-precedence
command to set the precedence of IP packets carried over PVC.
ATM PVC-Group view
ip relay address cycle
Use the
ip relay address cycle
command to enable the DHCP relay to allocate servers using the load
sharing approach, where the HASH algorithm applies allowing different clients to use different DHCP
servers and the same client to use the same DHCP server so long as it is possible.
servers and the same client to use the same DHCP server so long as it is possible.
System view
ip relay address (Interface view)
Use the
ip relay address
command to specify the exact location of a DHCP server by configuring an IP
relay address for it on the current interface.
Interface view
ip relay address interface (System view)
Use the
ip relay address interface
command to configure a relay address for the Ethernet interfaces
in a specified range for the purpose of transparent forwarding.
System view
ip route-static
Use the
ip route-static
command to configure a static route.
Use the
ip route-static vpn-instance
command to configure a static route. In the application of
multi-role host, you can configure a static route on a private network to specify the interface of another
private network or public network as its outbound interface.
private network or public network as its outbound interface.
System view
ip route-static detect-group
Use the
ip route-static detect-group
command to configure a static route and reference a detect group.
System view
ip route-static vpn-instance
Use the
ip route-static vpn-instance
command to configure a static route, by specifying a private
network interface as the outgoing-interface of this static route.
System view
ip rpf-longest-match
Use the
ip rpf-longest-match
command to configure the longest-match rule to be the multicast RPF route
selecting policy.
System view
ip rpf-route-static
Use the
ip rpf-route-static
command to configure multicast static routes.
System view
ip source-address-check
Use the
ip source-address-check
command to enable source address check function for IP packets.
System view
ip tcp vjcompress
Use the
ip tcp vjcompress
command to enable a PPP interface to compress the VJ TCP header.
Interface view
ip urpf
Use the
ip urpf
command to enable URPF check on the interface.
Interface view