Gestetner 5308l Guía Del Usuario
Changing the Settings of Service Programs
63
3
87
Memory Print
Each print set or stack will contain the number of
prints you program in Memory mode.
prints you program in Memory mode.
If set to Memory, Memory mode will work.
If set to Stack, Stack mode will work.
Note
❒ Default: 0
❒ Adjustment value: 0: Memory 1: Stack
❒ For details about Memory mode, see
❒ Adjustment value: 0: Memory 1: Stack
❒ For details about Memory mode, see
⇒
P.30
“Memory Mode—Group Printing from Different
Originals”.
Originals”.
88
Auto Memory/
Class
Class
In this function, the machine stops printing for 2 sec-
onds after one set of prints are completed in Memory
mode and Class mode. This gives you the chance to
separate each set when you do not have an optional
tape dispenser.
onds after one set of prints are completed in Memory
mode and Class mode. This gives you the chance to
separate each set when you do not have an optional
tape dispenser.
For example, you can remove prints one by one from
the paper delivery tray or insert one sheet of paper
between the prints.
the paper delivery tray or insert one sheet of paper
between the prints.
Note
❒ Default: 0
❒ Adjustment value: 0: No 1: Yes
❒ Adjustment value: 0: No 1: Yes
113
Resettable Count
Used to display the total number of masters and
prints.
prints.
• M: Total number of masters
• P: Total number of prints
114
CLR Resettable
Count
Count
Clears the resettable master/print counter.
Note
❒ Default: 0
❒ Adjustment value: 0: No 1: Yes
❒ Adjustment value: 0: No 1: Yes
SP No.
Mode
Function
SilverV-EN.book Page 63 Monday, May 15, 2000 3:23 PM