Gestetner 5308l Guía Del Usuario
Changing the Settings of Service Programs
61
3
25
Clear 2 In 1
By default, when master making is finished in Com-
bine Copies mode, this mode stays selected for the
next master making.
bine Copies mode, this mode stays selected for the
next master making.
If you want master making turned off, select “1”.
Note
❒ Default: 0
❒ Adjustable value: 0: No 1: Yes
❒ Even if you select “1” in this mode, Combine Cop-
❒ Adjustable value: 0: No 1: Yes
❒ Even if you select “1” in this mode, Combine Cop-
ies mode is not cleared when the next original are
set in the optional document feeder.
set in the optional document feeder.
❒ For details about Combine Copies, see
⇒
P.33
“Combine—Combining 2 Originals onto One Print”.
29
Pht Backgrnd Cor-
rect
rect
When you make prints in Photo or Letter/Photo
mode, the background of the prints might become
dirty. You can prevent this using this function.
mode, the background of the prints might become
dirty. You can prevent this using this function.
Note
❒ Default: 0
❒ Adjustment value: 0: No 1: Yes
❒ Adjustment value: 0: No 1: Yes
40
Original
Specifies the image mode at power on.
Note
❒ Default: 0
❒ Adjustment value:
❒ Adjustment value:
• 0: Letter mode
• 1: Letter/Photo mode
• 2: Photo mode
41
Image density
Specifies the image density at power on.
Note
❒ Default: 1
❒ Adjustment value:
❒ Adjustment value:
• 0: Light
• 1: Standard
• 2: Dark
• 3: Darker
SP No.
Mode
Function
SilverV-EN.book Page 61 Monday, May 15, 2000 3:23 PM