Gestetner f540 Guía De Operación
Other Transmission Features
60
3
More Transmission Functions
The following functions are useful
when transmitting documents.
when transmitting documents.
If Memory Runs Out While
Scanning Is in Progress
Scanning Is in Progress
Scanning of originals is interrupted if
the machine's memory runs out (the
remaining amount of memory de-
creases to 0%) while scanning and
storing the data is in progress. How-
ever, the data from documents al-
ready scanned can be transmitted.
the machine's memory runs out (the
remaining amount of memory de-
creases to 0%) while scanning and
storing the data is in progress. How-
ever, the data from documents al-
ready scanned can be transmitted.
Note
❒ We recommend that you use Im-
mediate Transmission to send a lot
of documents when the percentage
of free memory space is low. See
p.39 “Immediate Transmission”,
Basic Features.
of documents when the percentage
of free memory space is low. See
p.39 “Immediate Transmission”,
Basic Features.
❒ If you run out of memory while
storing an original (free space
reaches 0%), the following display
appears.
reaches 0%), the following display
appears.
❒ If a document jam occurs, the fol-
lowing display appears. Press the
{{{{OK}}}} key, then remove the docu-
ment. See p.95 “Clearing Original
Jams”, Basic Features.
Jams”, Basic Features.
Checking the Transmission
Result
Result
You can confirm successful transmis-
sion with the Communication Result
Report or the Communication Failure
Report for Memory Transmission,
and the Immediate Transmission Re-
sult Report for Immediate Transmis-
sion.
sion with the Communication Result
Report or the Communication Failure
Report for Memory Transmission,
and the Immediate Transmission Re-
sult Report for Immediate Transmis-
sion.
❖
❖
❖
❖ Communication Result Report
Turn on the Communication Result
Report if you want a report to be
printed after every transmission.
See p.64 “Communication Result
Report (Memory Transmission)”.
Report if you want a report to be
printed after every transmission.
See p.64 “Communication Result
Report (Memory Transmission)”.
❖
❖
❖
❖ Communication Failure Report
If you turn the Communication re-
sult Report off, the Communica-
tion Failure Report will be printed
when a communication fails. See
p.65 “Communication Failure Re-
port”.
sult Report off, the Communica-
tion Failure Report will be printed
when a communication fails. See
p.65 “Communication Failure Re-
port”.
❖
❖
❖
❖ Immediate Transmission Result Report
Turn on the Immediate Transmis-
sion Result Report if you want a re-
port to be printed after every
successful Immediate Transmission.
See p.65 “Transmission Result Re-
port (Immediate Transmission)”.
sion Result Report if you want a re-
port to be printed after every
successful Immediate Transmission.
See p.65 “Transmission Result Re-
port (Immediate Transmission)”.
Note
❒ You can display the communica-
tion result on the display. See p.34
“Checking the Transmission Re-
sult (TX Status)” and p.35 “Check-
ing the Reception Result (RX
Status)”.
“Checking the Transmission Re-
sult (TX Status)” and p.35 “Check-
ing the Reception Result (RX
Status)”.
❒ The communication result of Mem-
ory Transmission or Immediate
Transmission can be printed in the
Journal. See p.39 “Printing the
Journal”.
Transmission can be printed in the
Journal. See p.39 “Printing the
Journal”.
StellaF25_EN_Combine_F_pre_FM.book Page 60 Thursday, August 26, 2004 8:45 PM