Gestetner f540 Manual Suplementario
Transmitting IP-Fax
101
5
Note
❒ When specifying a destination
using IP address, you may need
to give the port number too, de-
pending on network settings at
the receiving end. For example, if
the destination IP address is
192.168.1.10 and the port number
is 2100, you should identify the
destination as 192.168.1.10:2100.
Contact your network adminis-
trator for details.
to give the port number too, de-
pending on network settings at
the receiving end. For example, if
the destination IP address is
192.168.1.10 and the port number
is 2100, you should identify the
destination as 192.168.1.10:2100.
Contact your network adminis-
trator for details.
❒ When specifying a destination
using the host name, you may
need to give the port number
too, depending on network set-
tings at the receiving end. For
example, if the destination host
name is "abc.company.com" and
the port number is 2100, you
should identify the destination
as "abc.company.com:2100".
Contact your network adminis-
trator for details.
need to give the port number
too, depending on network set-
tings at the receiving end. For
example, if the destination host
name is "abc.company.com" and
the port number is 2100, you
should identify the destination
as "abc.company.com:2100".
Contact your network adminis-
trator for details.
❒ When specifying a destination
using host name, set the DNS
Server Address beforehand.
Server Address beforehand.
❒ To enter texts registered in
"Template: Address", press the
{{{{★}}}} key, press the 0 or 1 key
to display the desired text, and
then press the
to display the desired text, and
then press the
{{{{OK}}}} key. See
DDDD
Press the
0
0
0
0 or 1
1
1
1 key to display
"2. IP-Fax Address".
Note
❒ If the Network Transmission
Auto Check function is turned
off, the display does not appear.
Proceed to step
off, the display does not appear.
Proceed to step
“User Parameters” (switch 32,
bit 1).
bit 1).
EEEE
Press the
{{{{OK}}}} key.
FFFF
If you want to specify another
destination, press the
destination, press the
{{{{OK}}}} key,
.
Note
❒ If you do not want to specify
other destination, proceed to
step
step
GGGG
Press the
{{{{Start}}}} key.
IP-Fax transmission begins.
Transmitting by Specifying a
VoIP Gateway
VoIP Gateway
This section describes how to send fax
messages through your network to
ordinary G3 fax machines connected
to the public telephone lines via a
VoIP gateway.
messages through your network to
ordinary G3 fax machines connected
to the public telephone lines via a
VoIP gateway.
AAAA
Set the original, and then select
the scan settings as necessary.
the scan settings as necessary.
BBBB
Press the user function key (
{{{{F1}}}}
to
{{{{F10}}}}) assigned to the Internet
FAX function.
The display for entering an ad-
dress appears.
dress appears.
ZHMS170E