Bunn smartwave aps Guía Del Usuario

Page 12

Remove sprayhead by 
turning counterclockwise

Bunn-O-Matic recommends deliming your coffee brewer periodically.  The actual frequency of deliming de-
pends on the mineral content of the water you use.  NOTE: In hard water areas, this may need to be done daily.  
It will help prevent liming problems in the brewer and takes less than a minute. 

Follow these simple steps:
1.  Unplug the brewer and 

let it cool down before 
proceeding.

2.  Remove the brew funnel.
3.  Remove the sprayhead by 

turning it to the left with 
your fi ngertips and set it 
aside.

4.  With the sprayhead 

removed, insert the 
deliming spring (pro-
vided) all the way into the 
sprayhead tube.  When 
inserted properly, no 
more than two inches of 
spring should be visible.  
Saw back and forth fi ve 
or six times. Remove the 
spring.

5.  Check the holes in the 

sprayhead.  If plugged by 
lime, they may be cleared 
using a toothpick.  Rinse 
the sprayhead with water 
before reinstalling it.

6.  Reinstall the sprayhead 

by turning it to the right.

7.  Plug in the brewer and 

allow the water to reheat 
before using.

40410  092407