Netgear FVS318N – Prosafe Wireless N VPN Firewall Prospecto
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
256
8
8.
Overview of the Show Commands
This chapter provides an overview of all show commands for the five configuration command
modes. The chapter includes the following sections:
modes. The chapter includes the following sections:
Network Settings (Net Mode) Show Commands
Enter the show net ? command at the CLI prompt to display the submodes in the show net
mode. The following table lists the submodes and their commands in alphabetical order:
mode. The following table lists the submodes and their commands in alphabetical order:
Table 14. Show commands: show net mode
Submode
Command Name
Purpose
ddns
Display the Dynamic DNS configuration.
dmz
Display the IPv4 DMZ configuration.
Display the IPv6 DMZ configuration.
ethernet
Display the MAC address and VLAN status for a
single or all Ethernet interfaces.
single or all Ethernet interfaces.
ipv6
Display the IPv6 routing mode configuration.
ipv6_tunnel
Display the IPv6 tunnel configuration.
Display the status of the IPv6 tunnels.
lan
Display the IPv4 hosts.
Display the LAN clients that received a leased
DHCP IP address.
DHCP IP address.
Display the LAN DHCP log.