Netgear FVS318N – Prosafe Wireless N VPN Firewall Prospecto
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
309
10
10.
Utility Commands
This chapter explains the configuration commands, keywords, and associated parameters in the
Util mode. The chapter includes the following sections:
Util mode. The chapter includes the following sections:
Overview Util Commands
Enter the util ? command at the CLI prompt to display the utility commands in the util
mode. The following table lists the commands in alphabetical order:
mode. The following table lists the commands in alphabetical order:
Table 19. Utility commands in the util mode
Command Name
Purpose
Back up the configuration file of the wireless VPN firewall to a
TFTP server.
TFTP server.
Look up the IP address of a domain name.
Upgrade the firmware of the wireless VPN firewall from a TFTP
server.
server.
Ping an IP address.
Ping a VPN endpoint IP address.
Reboot the wireless VPN firewall.
Restore the wireless VPN firewall to factory default settings.
Display the IPv4 routing table.
Display the IPv6 routing table.
Trace a route to an IP address.
Upload a previously backed-up configuration file of the wireless
VPN firewall from a TFTP server
VPN firewall from a TFTP server