Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단

10.   

Utility Commands

This chapter explains the configuration commands, keywords, and associated parameters in the 
Util mode. The chapter includes the following sections:

•     Overview Util Commands

•     Firmware Backup, Restore, and Upgrade Commands

•     Diagnostic Commands

Overview Util Commands

Enter the util ? command at the CLI prompt to display the utility commands in the util 
mode. The following table lists the commands in alphabetical order:

Back up the configuration file of the wireless VPN firewall to a 
TFTP server.

Look up the IP address of a domain name.

Upgrade the firmware of the wireless VPN firewall from a TFTP 
server.

Ping an IP address.

Ping a VPN endpoint IP address.

Reboot the wireless VPN firewall.

Restore the wireless VPN firewall to factory default settings.

Display the IPv4 routing table.

Display the IPv6 routing table.

Trace a route to an IP address.

Upload a previously backed-up configuration file of the wireless 
VPN firewall from a TFTP server