Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point Manual De Usuario
Initial Setup
17
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
The web browser displays the General page under the Configuration tab. If you are
using the access point as a standalone access point or as an access point with a wireless
controller, you must disable the cloud mode (see
using the access point as a standalone access point or as an access point with a wireless
controller, you must disable the cloud mode (see
After you disable the cloud mode and you log in to the access point, the web browser
displays the Dashboard page under the Monitoring tab of the main menu. For more
information, see
information, see
Web Management Interface
The navigation tabs across the top of the web management interface provide access to all
the configuration functions of the access point and remain constant. The menu items in the
blue bar change according to the navigation tab that is selected.
the configuration functions of the access point and remain constant. The menu items in the
blue bar change according to the navigation tab that is selected.
The top right corner of all pages that allow you to make configuration changes show the
Apply and Cancel buttons, and on several pages the Edit button.
Apply and Cancel buttons, and on several pages the Edit button.
These buttons provide the following functions:
•
Edit. Allows you to edit the existing configuration.
•
Cancel. Cancels all configuration changes that you made on the page.
•
Apply. Saves and applies all configuration changes that you made on the page.
Disable the Cloud Mode for a Standalone Access Point
When the access point runs firmware version 3.5.6.0 or a later version, by default, the cloud
mode is enabled for the access point and the web management interface is a restricted
interface that shows only the Configuration and Monitoring menu tabs with limited
configuration options.
mode is enabled for the access point and the web management interface is a restricted
interface that shows only the Configuration and Monitoring menu tabs with limited
configuration options.
If you are using the access point as a standalone access point or as an access point with a
wireless controller, you must disable the cloud mode.
wireless controller, you must disable the cloud mode.
To disable the cloud mode:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.