Xerox Phaser 340 Guía Del Usuario
Using Different Printer Language Modes
D
Printing Reference
D-7
Testing printer language mode changes
HP-GL mode
HPGLTEST.PLT is an HP-GL file that prints a single line of text if the printer
is operating in HP-GL mode.
is operating in HP-GL mode.
Send the HPGLTEST.PLT file to the printer after you send HPGL.PS or
AIS.PS, to make sure the language change was made correctly.
AIS.PS, to make sure the language change was made correctly.
PostScript mode
PSTEST.PS is a PostScript file that prints a single line of text if the printer is
operating in PostScript mode.
operating in PostScript mode.
Send the PSTEST.PS file to the printer after you send PSCRIPT.PS or AIS.PS,
to make sure the language change was made correctly.
to make sure the language change was made correctly.
Sending a language test file to the printer
1.
Install the utility files from either the Phaser 340 CD-ROM or the
Printer Software for Windows diskette; refer to page 3-35 for
instructions.
Printer Software for Windows diskette; refer to page 3-35 for
instructions.
2.
Locate the installed files in the PHSR340 subdirectory inside the
PHSRTOOL directory on your hard disk.
PHSRTOOL directory on your hard disk.
3.
Use one of the following methods to send a file to the printer:
■
PC users: Use the DOS COPY command to send the file to the
printer; refer to page 3-38 if you need instructions. (Windows 3.1
users can also use the Copy command in the File Manager; see
page 3-37 if you need instructions.)
printer; refer to page 3-38 if you need instructions. (Windows 3.1
users can also use the Copy command in the File Manager; see
page 3-37 if you need instructions.)
■
Workstation users: Send the file to the printer as you would any
utility file.
utility file.