Xerox Phaser 340 Guía Del Usuario
Using Different Printer Language Modes
D
Printing Reference
D-9
Allowable values for pen numbers are 0 through 255. Pen width is
measured in millimeters. Red, green, and blue values can be any number
between 0.0 and 1.0. The following table shows the red, green, and blue
combinations for each of the eight basic colors.
measured in millimeters. Red, green, and blue values can be any number
between 0.0 and 1.0. The following table shows the red, green, and blue
combinations for each of the eight basic colors.
To add a new pen, you must redefine pens 0 through 7 first, then add the
new pens you want.
new pens you want.
To set pen widths and colors to values other than those in HPGLPENS.PS,
follow these steps:
follow these steps:
1.
Configure the printer’s port to receive PostScript; see page D-6 for
instructions.
instructions.
2.
Install the utility files from either the Phaser 340 CD-ROM or the
Printer Software for Windows diskette; refer to page 3-35 for
instructions.
Printer Software for Windows diskette; refer to page 3-35 for
instructions.
3.
Locate the installed files in the PHSR340 subdirectory inside the
PHSRTOOL directory on your hard disk, and open the
HPGLPENS.PS file in a text editor.
PHSRTOOL directory on your hard disk, and open the
HPGLPENS.PS file in a text editor.
HP-GL pen color values
Pen color
number
number
Color
Red value
Green value
Blue value
0
white
1.0
1.0
1.0
1
black
0.0
0.0
0.0
2
red
1.0
0.0
0.0
3
green
0.0
1.0
0.0
4
blue
0.0
0.0
1.0
5
cyan
0.0
1.0
1.0
6
magenta
1.0
0.0
1.0
7
yellow
1.0
1.0
0.0