Toshiba RAS-10 N3KV-E/RAS-10 N3AV-E Manual De Usuario

Press 

),;

 : Move the louver in 

the desired vertical direction.

Press 

6:,1*

 : Swing the air 

automatically and press again to stop.

For horizontal direction, adjust 
manually.

Preparing Filters
  1. Open the air inlet grille and remove the air fi lters.
 2. 

Attach 

the 

fi lters. (see detail in the accessory sheet).

Loading Batteries
  1. Remove the slide cover. 
  2. Insert 2 new batteries (AAA type)

following the (+) and (–) positions.

 1. 

Push 

 by tip of the pencil.

 2. 

Press 

 or 

: adjust the time.

 3. 

Press 

 : Set the time.

Remote Control Reset
  Push 

 by tip of the pencil.

  1. Remove the battery.

 2. 

Press 

.

  3. Insert the battery.

Note:
  •  Do not move the louver manually by others.
  •  The louver may automation positioning by some operation mode.

1 

Infrared signal emitter

2 

Start/Stop button

3 

Mode select button (MODE)

4 

Temperature button (TEMP)

5 

Fan speed button (FAN)

6 

Swing louver button (SWING)

7 

Set louver button (FIX)

8 

On timer button (ON)

9 

Off timer button (OFF)

-

Setup button (SET)

=

Clear button (CLR)

q

Memory and Preset button (PRESET)

w

One-Touch button (ONE-TOUCH)

e

High power button (Hi-POWER)

r

Economy button (ECO)

t

Quiet button (QUIET)

y

Comfort sleep button (COMFORT SLEEP)

u

Filter reset button (FILTER)

i

Set clock button (CLOCK)

o

Check button (CHECK)

p

Reset button (RESET)

Press the “ONE-TOUCH” button for fully automated operation that is 
customised to the typical consumer preferences in your region of the world. 
The customised settings control temperature air fl ow strength, air fl ow 
direction and other settings to provide you alternate contact with “ONE-
TOUCH” of the button. If you prefer other settings you can select from the 
many other operating functions of your Toshiba unit.

 Press 

21(728&+

: Start the operation.

To automatically select cooling, heating, or fan only operation

1. Press 

02'(

 : Select A.

2. Press 

 : Set the desired temperature.

3. Press 

)$1

 : Select AUTO, LOW  , LOW+ 

, MED 

, MED+ 

, 

or HIGH 

.

1. Press 

02'(

 : Select Cool 

,  Heat 

, or Fan only 

.

2. Press 

 : Set the desired temperature.

  Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication

3. Press 

)$1

 : Select AUTO, LOW  , LOW+ 

, MED 

, MED+ 

, 

or HIGH 

.

For dehumidifi cation, a moderate cooling performance is controlled 
automatically.

 1. 

Press 

02'(

 : Select Dry  .

 2. 

Press 

 : Set the desired temperature.

To automatically control room temperature and airfl ow for faster cooling or 
heating operation (except in DRY and FAN ONLY mode)

 Press 

+L32:(5

: Start and stop the operation.

To automatically control room to save energy (except in DRY and FAN ONLY 
mode)
 Press 

 : Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 1 

degree/hour for 2 hours (maximum 2 degrees increase). For heating 
operation the set temperature will decrease.

CLEANING

RESET

TIMER

OPERATION

3

2

1

1

OPERATION (Green)

2

TIMER / CLEANING (Yellow)

3

RESET button

6:,1*

)$1

),;

48,(7

+L32:(5

21(728&+

&20)257

6/((3

4

5

-

p

=

e

t

8

1

2

w

y

o

r

q

3

i

7

6

u

9

0

•  Do not install, repair, open or remove the cover. It may expose you 

to dangerous voltages. Ask the dealer or the specialist to do this.

•  Turning off the power supply will not prevent potential electric 

shock.

•  The appliance shall be installed in accordance with national wiring 

regulation.

•  Means for disconnection from the supply having a contact 

separation of at least 3 mm in all poles must be incorporated in 

the fi xed wiring.

0

•  Do not expose your body directly to cool air for a long time.

•  Do not insert your fi nger or any article into the air inlet/outlet.

•  When an abnormality (burning smell, etc.) occurs, stop the air 

conditioner and disconnect the power supply or turn off the 

breaker.

•  This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a 

person responsible for their safety.

•  Children should be supervised to ensure that they do not play with 

the appliance.

•  Do not use any refrigerant different from the one specifi ed for 

complement or replacement. Otherwise, abnormally high pressure 

may be generated in the refrigeration cycle, which may result in a 

failure or explosion of the product or an injury to your body.

0

•  Do not wash the unit with water. It may cause an electric shock.

•  Do not use this air conditioner for other purposes such as 

preserving food, breeding animal, etc.

•  Do not step or put anything on the indoor/outdoor unit. It may 

cause an injury or damage the unit.

•  Do not touch aluminium fi n because it may cause an injury.

•  Before cleaning the unit, turn off the main switch or the circuit 

breaker.

•  When the unit won’t be used for a long time, turn off the main 

switch or the circuit breaker.

•  It is recommended that maintenance be performed by a specialist 

when the unit has been operated for a long time.

•  The manufacturer shall not assume any liability for the damage 

caused by not observing the description of this manual.

1113950109_EN.indd   2

1113950109_EN.indd   2

8/8/12   11:08 AM

8/8/12   11:08 AM