Cisco Cisco ONS 15310-MA SDH Multiservice Platform Guía De Instalación
3
Upgrading the Cisco ONS 15310-MA SDH to Release 9.2.1.3
OL-26732-01
DLP- U537 Verify CTC Workstation Requirements
NTP-U487 Preparing to Upgrade to a New Release
Step 1
Read the Release Notes for Cisco ONS 15310-MA SDH Release 9.2.1.
Step 2
Log into the node that you want to upgrade. For detailed instructions, refer to the
Cisco ONS 15310- MA SDH Procedure Guide.
Cisco ONS 15310- MA SDH Procedure Guide.
Step 3
Complete the
.
Step 4
When you have completed the tasks in this section, proceed with the
.
Stop. You have completed this procedure.
DLP-U537 Verify CTC Workstation Requirements
Step 1
Ensure that your workstation is one of the following:
•
IBM-compatible PC with a Pentium IV or faster processor, CD-ROM drive, a minimum of 1 GB
RAM and 250 MB of available hard drive space, Windows 2000 Professional (with Service Pack 3),
Windows Server 2003 and 2008, or Windows XP Professional (with Service Pack 1 and 2), Windows
Vista, or Windows 7.
RAM and 250 MB of available hard drive space, Windows 2000 Professional (with Service Pack 3),
Windows Server 2003 and 2008, or Windows XP Professional (with Service Pack 1 and 2), Windows
Vista, or Windows 7.
•
UNIX workstation with Solaris Version 9 or 10 on an UltraSPARC-III or faster processor, with a
minimum of 1 GB RAM and a minimum of 250 MB of available hard drive space
minimum of 1 GB RAM and a minimum of 250 MB of available hard drive space
Purpose
This procedure provides critical information checks and tasks you must
complete before starting an upgrade to Release 9.2.1.3.
complete before starting an upgrade to Release 9.2.1.3.
Tools/Equipment
•
ONS 15310-MA SDH nodes to upgrade
•
PC or UNIX workstation
•
Cisco ONS 15310-MA SDH Software R9.2.1.3
Prerequisite Procedures None
Required/As Needed
Required
Onsite/Remote
Onsite or remote
Security Level
Superuser
Purpose
This task verifies all PC or UNIX workstation hardware and software
requirements. Before upgrading the workstation to run CTC Software
R9.2.1.3, complete this task.
requirements. Before upgrading the workstation to run CTC Software
R9.2.1.3, complete this task.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures None
Required/As Needed
Required
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Superuser