Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
10
•
To retrieve all alarms on a specific DS1 port see
•
To retrieve all conditions on a specific DS1 port see
•
To retrieve all alarms on a system see
•
To retrieve all conditions on a system see
.
•
To retrieve actual PM values on a DS1 port see
•
To retrieve the thresholds in place for a DS1 port see
•
To create a loopback see
•
To release a loopback see
Note
When you are finished using TL1 remember to log out. Follow the steps in the
For complete TL1 documentation, refer to the Cisco ONS SONET TL1 Command Guide and the
Cisco ONS SONET TL1 Reference Guide. For a command quick reference guide, refer to the Cisco
ONS SONET TL1 Command Quick Reference Guide.
Cisco ONS SONET TL1 Reference Guide. For a command quick reference guide, refer to the Cisco
ONS SONET TL1 Command Quick Reference Guide.
ED-T1
Use the ED-T1 command edits the attributes related to a DS1/T1 port. ED-T1 is from the Ports
category.
category.
Input Format:
ED-T1:[<TID>]:<AID>:<CTAG>[:::LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],
[TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SOAK=<SOAK>],[SFBER=<SFBER>],
[SDBER=<SDBER>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[NAME=<NAME>],
[CMDMDE=<CMDMDE>],[AISONLPBK=<AISONLPBK>],[MODE=<MODE>],
[SYNCMAP=<SYNCMAP>],[ADMSSM=<ADMSSM>],[VTMAP=<VTMAP>],
[AISVONAIS=<AISVONAIS>],[AISONLOF=<AISONLOF>],[INHFEBPLPBK=<INHFEBPLPBK>],
[BERTMODE=<BERTMODE>],[BERTPATTERN=<BERTPATTERN>],
[BERTERRCOUNT=<BERTERRCOUNT>][:<PST>[,<SST>]];
[TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SOAK=<SOAK>],[SFBER=<SFBER>],
[SDBER=<SDBER>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[NAME=<NAME>],
[CMDMDE=<CMDMDE>],[AISONLPBK=<AISONLPBK>],[MODE=<MODE>],
[SYNCMAP=<SYNCMAP>],[ADMSSM=<ADMSSM>],[VTMAP=<VTMAP>],
[AISVONAIS=<AISVONAIS>],[AISONLOF=<AISONLOF>],[INHFEBPLPBK=<INHFEBPLPBK>],
[BERTMODE=<BERTMODE>],[BERTPATTERN=<BERTPATTERN>],
[BERTERRCOUNT=<BERTERRCOUNT>][:<PST>[,<SST>]];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to leave the TID blank.
to leave the TID blank.
•
AID is the access identifier to indicate slot and port.
•
CTAG is any non-blank character series that does not have to be unique.
•
LINECDE is a line code. Values are AMI or B8ZS.
•
FMT is a frame format. Values are D4, ESF, or unframed.
•
LBO is a line build out. Values are 0-131, 132-262, 263-393, 394-524, or 525-655.