Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación
17
Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly
78-18207-01
Installation Instructions
Install the Tie-Down Bar
Tie-down bars can be installed to secure cabling on the rear of the bay assembly rack. The tie-down bar
can be used to provide a diverse path for redundant power feeds and cables. Up to eight tie-down bars
can be installed in the four-shelf bay assembly rack, one on each side of each bay (
can be used to provide a diverse path for redundant power feeds and cables. Up to eight tie-down bars
can be installed in the four-shelf bay assembly rack, one on each side of each bay (
).
Step 1
To attach a single tie-down bar, align the ends of the tie-down bar with two screw holes located in the
vertical rack frame. The L-shaped bends with screw holes at the ends of the tie-down bar should point
outward away from the bays.
vertical rack frame. The L-shaped bends with screw holes at the ends of the tie-down bar should point
outward away from the bays.
Step 2
Attach the tie-down bar to the rack with two screws.
Figure 9
Installing the Tie-Down Bar
Tie-Down Bar and Fiber Bracket Locations
shows the proper location of the tie-down bars and fiber brackets on the rear of the bay
assembly rack. Measuring the height in inches from the floor, the locations of the top screw hole on each
tie-down bar are shown on the left side of the figure. The attachment points for the fiber brackets are
shown on the right side of the figure.
tie-down bar are shown on the left side of the figure. The attachment points for the fiber brackets are
shown on the right side of the figure.
211147
Tie-down bar