Cisco Cisco Catalyst 6500 Cisco 7600 Router Traffic Anomaly Detector Module Notas de publicación
7
Release Note for the Cisco Traffic Anomaly Detector Module
OL-11859-02
Operating Consideration
Operating Consideration
The copy ftp command supports active mode only.
MultiDevice Manager Commands Omitted from the
Configuration Guide
Configuration Guide
Three commands related to the Cisco DDoS MultiDevice Manager (MDM) software functionality on the
Detector module were introduced in software version 5.1(5), but were omitted from the Cisco Traffic
Anomaly Detector Module Configuration Guide. The following sections describe these commands:
Detector module were introduced in software version 5.1(5), but were omitted from the Cisco Traffic
Anomaly Detector Module Configuration Guide. The following sections describe these commands:
•
•
•
mdm logging trap Command
To configure traps for MDM logging, use the mdm logging trap command in global configuration
mode. To disable logging functions, use the no form of this command.
mode. To disable logging functions, use the no form of this command.
The syntax for this command is as follows:
mdm logging trap {alerts | critical | debugging | emergencies | errors | informational | notifications |
warnings}
warnings}
The following table describes the keywords for the mdm logging trap command.
For example, to capture and log informational messages, use the mdm logging trap informational
command in global configuration mode.
command in global configuration mode.
user@DETECTOR# configure
user@DETECTOR-conf# mdm logging trap informational
alerts
Immediate action needed (severity=1).
critical
Critical conditions (severity=2).
debugging
Debugging messages (severity=7).
emergencies
System is unusable (severity=0). This is the default.
errors
Error conditions (severity=3).
informational
Informational messages (severity=6).
notifications
Normal but significant conditions (severity=5).
warnings
Warning conditions (severity=4).