Cisco Cisco Aironet 1552WU Outdoor Access Point Guía De Instalación
5
EU Directive 1999/5/EC - Compliance Information for the AIR-CAP1550 Series Lightweight IEEE802.11 a/b/g/n Outdoor Mesh Access Points
78-20916-01
CE Marking
The following standards were applied during the assessment of the product against the requirements of
the Directive 1999/5/EC:
the Directive 1999/5/EC:
•
Radio: EN 301.893 and EN 300 328
•
EMC: EN 301 489-1 and EN 301 489-17
•
Safety: EN 60950 and EN 50385
Note
The 5-GHz equipment employs a Dynamic Frequency Selection (DFS) mechanism which is required for
operation in the 5 GHz frequency range.
operation in the 5 GHz frequency range.
CE Marking
The following CE mark is affixed to the equipment and its packaging:
National Restrictions
In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made
available for the use of wireless LANs.
available for the use of wireless LANs.
provides an overview of the regulatory requirements in
general applicable for the 2.4- and 5-GHz bands.
Later in this section you will find an overview of countries in which additional restrictions or
requirements or both are applicable.
requirements or both are applicable.
The requirements for any country may evolve. Cisco recommends that you check with the local
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.
Table 1
Overview of Regulatory Requirements for Wireless LANs
Frequency Band (MHz)
Max Power Level
(EIRP)
1
(mW)
1.
Effective isotropic radiated power (EIRP).
Indoor Only
Indoor and Outdoor
2400–2483.5
100
X
5150–5350
2, 3
2.
Dynamic Frequency Selection and Transmit Power Control is required in the 5250- to 5350-MHz and 5470- to 5725-MHz
frequency range.
frequency range.
3.
As these are outdoor products, the band 5150 - 5350 MHz is not applicable.
200
X
5470–5725
3
1000
X