Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point Guía De Instalación

When installing an access point on a horizontal or vertical surface, you must ensure that the access point 
is oriented with the LED indicators pointing down (see 

). This 

positioning allows the LEDs to be visible to someone on the ground below the access point.

You must also ensure the access point is mounted with the hinged access cover facing out.

Omnidirectional antennas are vertically polarized and should be mounted vertically.

The optional pole mount kit contain a mounting bracket for wall mounting. You can use the mounting 
bracket as a template to mark the positions of the mounting holes for your installation. You then install 
the mounting plate, and attach the access point when you are ready. 

 lists the material that you 

will need to provide in addition to the pole mount kit.

The mounting surface, attaching screws, and optional wall anchors must be able to support a 50 lb
(22.7 kg) static weight. 

Ground lug and screws (provided with access point)
Crimping tool for ground lug, Panduit CT-720 with 
CD-720-1 die (http://onlinecatalog.panduit.com) 
Four M8 or 5/16 in. (31 mm) screws
Four wall anchors (specified for wall material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6-AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
13-mm box-end wrench or socket set

Yes
No

No
No
No
No
No
No
No
No
No