Cisco Cisco Aironet 1130 AG Access Point Guía De Instalación
20
78-xxxxx-0x
Follow these steps to configure the system power settings using the GUI:
1.
Open your browser and enter the access point’s IP address in the address
field. A login and password screen appears.
field. A login and password screen appears.
2.
Enter the user name Cisco and password Cisco. The username and
password are case sensitive.
password are case sensitive.
3.
When the access point does not receive enough power for full operations,
it is in low power mode. If your access point is in low power mode, a
warning message appears indicating that all radios are disabled due to
insufficient power. Click OK to continue. The System Configuration
page appears.
it is in low power mode. If your access point is in low power mode, a
warning message appears indicating that all radios are disabled due to
insufficient power. Click OK to continue. The System Configuration
page appears.
4.
Scroll down to the System Power Settings section as shown in the
following illustration:
following illustration:
5.
Set the power settings and power injector fields and verify your switch
status as indicated in the power settings table.
status as indicated in the power settings table.