Cisco Cisco Packet Data Interworking Function (PDIF)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
▀ icmpv6 any-match
▄ Command Line Interface Reference, StarOS Release 16
5018
icmpv6 any-match
This command configures an access ruledef to match any ICMPv6 traffic for the user.
Product
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-fw-ruledef)#
Syntax
[ no ] icmpv6 any-match operator condition
no
Removes previously configured ICMPv6 any-match ruledef.
operator
Specifies how to logically match the analyzed state.
operator
must be one of the following:
!=
: Does not equal
=
: Equals
condition
Specifies the condition to be matched for the user traffic.
condition
must be one of the following:
FALSE
: Specified condition is FALSE.
TRUE
: Specified condition is TRUE.
Usage
Use this command to specify an access ruledef to match any ICMPv6 traffic of the user.
Example
The following command creates an access ruledef to match any non-ICMPv6 traffic of the user:
icmpv6 any-match = FALSE