Cisco Cisco Packet Data Interworking Function (PDIF)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
icmpv6 code ▀
Command Line Interface Reference, StarOS Release 16 ▄
5019
icmpv6 code
This command configures an access ruledef to analyze user traffic based on ICMPv6 code.
Product
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-fw-ruledef)#
Syntax
[ no ] icmpv6 code operator code
no
Removes previously configured ICMPv6 code ruledef.
operator
Specifies how to logically match the ICMPv6 code.
operator
must be one of the following:
!=
: Does not equal
<=
: Less than or equals
=
: Equals
>=
: Greater than or equals
code
Specifies the ICMPv6 code.
code
must be an integer from 0 through 255.
Usage
Use this command to define an access ruledef to analyze user traffic based on the ICMPv6 code.
Example
The following command creates an access ruledef for analyzing user traffic using the ICMPv6 code as
23
:
icmpv6 code = 23