Cisco Cisco Packet Data Interworking Function (PDIF)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
▀ icmpv6 type
▄ Command Line Interface Reference, StarOS Release 16
5020
icmpv6 type
This command configures an access ruledef to analyze user traffic based on ICMPv6 type.
Product
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-fw-ruledef)#
Syntax
[ no ] icmpv6 type operator type
no
Removes previously configured ICMPv6 type ruledef.
operator
Specifies how to logically match the ICMPv6 type.
operator
must be one of the following:
!=
: Does not equal
<=
: Less than or equals
=
: Equals
>=
: Greater than or equals
type
Specifies the ICMPv6 type.
type
must be an integer from 0 through 255.
For example, 0 for ECHO Reply, 3 for Dest. Unreachable, and 5 for Redirect.
Usage
Use this command to define an access ruledef to analyze user traffic based on the ICMPv6 type.
Example
The following command creates an access ruledef for analyzing user traffic using an ICMPv6 type as
123
:
icmpv6 type = 123