Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Guía De Instalación

To configure the wireless access points, you can either use Ethernet or 
wireless. Please follow these steps to access the Wizard and then the 
web-based configuration utility from your computer by Ethernet:

Ethernet: Connect the wireless access point to the same network 
(IP subnet) as your computer. The factory default IP address 
configuration of the access points is DHCP. Make sure your DHCP 
server is running and can be reached.

See 

 for troubleshooting information, or if you 

do not have a DHCP server. 

Wireless: Search the wireless SSID "CiscoSB-Setup", and connect 
to this SSID with the passphrase "cisco123".

Locate the IP address of the wireless access point.

a.

The wireless access points can be accessed and managed by 
Cisco network tools and services including the Cisco FindIT 
Network Discovery Utility that enables you to automatically 
discover all supported Cisco devices in the same local 
network segment as your computer. You can get a snapshot 
view of each device or launch the product configuration utility 
to view and configure the settings. For more information, see 

.

b. The wireless access points are Bonjour-enabled and 

automatically broadcast their services and listen for services 
being advertised by other Bonjour-enabled devices. If you 
have a Bonjour-enabled browser, such as Microsoft Internet 
Explorer with a Bonjour plug-in, or the Apple Mac Safari 
browser, you can find the wireless access point on your local 
network without knowing its IP address.

You can download the complete Bonjour for Microsoft Internet 
Explorer browser from Apple’s website by visiting: 

 

c.

Locate the IP address assigned by your DHCP server by 
accessing your router or DHCP server. See your DHCP server 
instructions for more information. 

Launch a web browser, such as Microsoft Internet Explorer or 
Mozilla Firefox.

In the Address field, enter the default DHCP address and press the 
Enter key.