Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Guía De Instalación

If the wireless access points do not receive a DHCP response (there is no 
DHCP server on your network) after 60 seconds, the access points will 
fallback to the following default static IP address: 192.168.1.245 and a 
default mask of 255.255.255.0. To reach that IP address, be sure that your 
computer is on the 192.168.1.xxx network.

• The Cisco WAP571 uses PoE power supply; unplug your Ethernet 

connection and plug it back in.

or

• With the power on, press the Reset button with an opened paper clip 

for less than three seconds, or until the lights go off. 

–

Release the Reset button as soon as the lights go off, or you will 
restore the device to factory default settings and lose your 
configurations.

–

Release the Reset button when the system light turns on. 

• With the power on, press and hold the Reset button with an opened 

paper clip for more than 10 seconds. The system light will go off.

Cisco Support 
Community

Cisco Support and 
Resources

Phone Support Contacts