Cisco Cisco Aironet 1140 Access Point Prospecto
Link the web authentication list with the local server:
ap(config)#aaa authentication login web_list group radius
E.
Note: You can use an external radius server in order to host the guest user accounts. In order to do this,
configure the radius−server host command to point to the external server instead of the AP IP address.
configure the radius−server host command to point to the external server instead of the AP IP address.
Configure the Wireless Client
Complete these steps in order to configure the wireless client:
In order to configure the wireless network on your windows supplicant utility with the SSID named
Guest, navigate to Network and Internet > Manage Wireless Networks, and click Add.
Guest, navigate to Network and Internet > Manage Wireless Networks, and click Add.
1.
Select Manually connect to a wireless network, and enter the required information, as shown in this
image:
image:
2.
Click Next.
3.
Verify
After the configuration is complete, the client can connect to the SSID normally, and you see this on the AP