Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Guía De Instalación

Descargar
Página de 14
6
Installing Cisco ONS 15454 SONET/SDH XC-VXC-10G Cards
78-17123-01
  XC-VXC-10G Cross-Connect Card Description
192 VC-4 bidirectional cross-connects
384 VC-3 bidirectional ports
192 VC-3 bidirectional cross-connects
2016 VC-12 ports by means of 96 logical VC-3 ports
1008 VC-12 bidirectional cross-connects
2688 VC-11 ports by means of 96 logical VC-3 ports
1344 VC-11 bidirectional cross-connects
Nonblocking operation at the VC-11 level
VC-11, VC-12, VC-4/-4c/-8c/-16c/-64c cross-connects
Grooming modes supported:
Full VC-12 grooming
Full VC-11 grooming
Mixed grooming (50%/50%): 1008 x 1008 VC-12/1344 x 1344 VC-11
Caution
Do not operate the ONS 15454 with only one XC-VXC-10G card. Two cross-connect cards must always 
be installed.
The XC-VXC-10G supports errorless side switches (switching from one XC-VXC-10G on one side of 
the shelf to the other XC-VXC-10G on the other side of the shelf) at the VC-4 circuit level when the 
switch is initiated through software and the shelf is equipped with TCC2/TCC2P cards. 
Note
Only the 15454_MRC-12, OC192SR1/STM64IO Short Reach, and OC192/STM64 Any Reach cards 
(the latter two cards are designated in CTC as STM64-XFP) support errorless side switches.
Note
Errorless side switch for the XC-VXC-10G card is not supported at the lower circuit levels (VC-3 and 
VC-11/VC-12).
 shows the XC-VXC-10G cross-connect matrix.