Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Guía De Instalación

 describes the two card-level LEDs on the XC-VXC-10G faceplate.

For SONET, the XC-VXC-10G card supports the same features as the XC10G card. Either the 
XC-VXC-10G or XC10G cards are required for OC-192, OC3-8, and OC12-4 operation and OC-48 AS 
operation. For SDH, The XC-VXC-10G card supports the same features as the XC-VXL-10G and 
XC-VXL-2.5G cards. The XC-VXC-10G cards support STM-64 operation.

If you are using Ethernet cards, the E1000-2-G or the E100T-G must be used when the XC-VXC-10G 
cross-connect cards are in use.

1

2

.

.

.

.

20

Input Ports

Output Ports

4X

STM-64

8X

STM-16

8X
STM-16

4X
STM-64

XC-XVC-10G STM-1 Cross-connect ASIC (384x384 STM-1)

1

2

.

.

.

.

20

VTXC

TUXC

6X STM-16 (Aux Ports)

2X STM-16 (VT Ports)

134271

TU -11, TU-12 Cross-connect ASIC

TU-3 Cross-connect ASIC (uses all 8 STM-16 ports)

192 bidirectional TU-3 cross-connects

1008 bidirectional TU-12 cross-connects
1344 bidirectional TU-11 cross-connects

Red FAIL LED

Indicates that the cards processor is not ready. This LED illuminates during 
reset. The FAIL LED flashes during the boot process. Replace the card if the 
red FAIL LED persists.

ACT/STBY LED

Green (Active)

Amber (Standby)

Indicates whether the XC-VXC-10G is active and carrying traffic (green), or 
in standby mode to the active XC-VXC-10G card (amber).