Samsung AS24UUQ Manual De Usuario

ENGLISH

Fixing the Ourdoor Unit in Place

Install the outdoor unit to a stable base to avoid the generation of noise and

vibration, especially when installing the unit close to a neighbor.

If you install the outdoor unit in a place exposed to strong winds or at a height,

to an appropriate support (wall or ground).

1 Place the outdoor unit as indicated on the top of the unit to let the

discharged air out properly.

2 Fix the outdoor unit to an appropriate support using anchor bolts.

3 If the outdoor unit is exposed to strong winds, install shield plates around the

outdoor unit so that the fan can operate correctly.

'X' mm

Rubber leg

m '

Model

09/12

454

254

538

290

543

319

• Secure the rubber leg to prevent the generation of noise and vibration.

Final Check and Trial Operation

To complete the installation, perform the following checks and tests to

ensure that the air conditioner operates correctly.

Check the followings:
• Strength of the installation site

• Tightness of pipe connection to detect gas leak

• Electric wiring connection

• Heat-resistant insulation of the pipe

• Drainage

• Grounding conductor connection

• Correct operation (follow the steps below)

1. Press the Power button and check the following:



The indicator on the indoor unit lights up.



3. Press the Air swing button and check the following:



4. Press the Power button to stop the operation.

2. Press the Mode button to select Cool or Heat mode.



In Cool mode, use Temp + or - button and set the temperature at 16°C.

Cooling mode (indoor unit check) - Inlet air temp. - Outlet air temp : From 10°C to 12°C ( indicative delta T)

• Approximately 3~5 minutes later, outdoor unit will start to operate and the Cool or Warm air will blow out.
• After 12 minutes of stationary condition check the indoor unit air treatment:

• When you complete the installation successfully, hand over this manual to the user for storage in a handy and safe

place.