Samsung Wireless Mono Multifunction Printer Manual De Usuario

.3   

<Getting Started>

Temporarily disable the computer firewall before continuing by doing 
the following:

From the Windows Start menu, select All Programs > Samsung 
Network Printer Utilities

 > SetIP > SetIP.

Click on the 

icon(third from left) in the SetIP window to open 

the TCP/IP configuration window.

Enter the machine’s new information into the configuration window 
as follows:

• MAC Address: Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.

 MAC address is a hardware serial number of the machine’s 
network interface and can be found in on the Network 
Configuration Report

.

• IP Address: Enter a new IP address for your printer the same as the 

computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 
192.168.1.X. (X is number between 1 and 254 other than the 
computer’s address.)

• Subnet Mask: Enter this exactly the same as the computer’s Subnet 

Mask.

• Default Gateway: Enter this exactly the same as the computer’s 

Default Gateway.

Click Apply, and then click OK. The machine will automatically print 
the Configuration report. Confirm that all the settings are correct.

Click Exit to close the SetIP program.

If necessary, restart the computer’s firewall.

Window XP
• Open Control Panel.
• Double click Security 

.

• Click Windows Firewall.
• Disable the firewall.

Macintosh OS
• Open System Preferences.
• Click Sharing.
• Click the Firewall menu.
• Turn firewall off.

You can also set up the various network settings through the network 
administration programs.
• SyncThru™ Web Admin Service: Web-based printer management 

solution for network administrators. SyncThru™ Web Admin Service 
provides you with an efficient way of managing network devices and 
lets you remotely monitor and troubleshoot network machines from 
any site with corporate internet access. Download this program from

 

.

• SyncThru™ Web Service: Web server embedded on your network 

print server, which allows you to: (A) Configure the network 
parameters necessary for the machine to connect to various network 
environments. (B) Customize machine settings.

You must install the printer driver software for printing. The software 
includes drivers, applications, and other user friendly programs. 

Make sure that the network setup for your machine is completed. (See 

"Setting up the network" on page 3.2.) All applications should be closed 

on your computer before beginning the installation.
If your IP assignment method is DHCP and IP address can be changed 

whenever machine in turned on, we recommend you to use the Bonjour 

program. Go to the 

http://developer.apple.com/networking/bonjour/

download/

, select the program Bonjour for Windows according to your 

computer operating system, and install the program. In case of Mac OS 

X, this program might be already installed in your PC. This program will 

allow you to fix the network parameter automatically. This Bonjour 

program does not support Linux.

If your IP assignment method is static, follow the steps below.

Insert the Printer Software CD-ROM into your CD-ROM drive. The 
CD-ROM should automatically run, and an installation window 
appears.

Click Next.

If the installation window does not appear, click Start > Run. Type 
X:\Setup.exe, replacing “X” with the letter which represents your 
drive and click OK.

If you use Windows Vista, Windows 7 and Windows Server 2008 
R2, click Start > All Programs > Accessories > Run, and type 
X:\Setup.exe.

The installation window may slightly differ, if you are 
reinstalling the driver.

Select Typical installation for a network printer, and then click 
Next

. 

The following procedure is based on Windows XP. The procedure 
and popup window which appears during the installation may 
differ depending on the operating system, machine features, or 
the interface in use.