Samsung Wireless Mono Multifunction Printer Manual De Usuario

.5   

<Getting Started>

Press and hold Stop/Clear button for about 4 seconds to print a 

machine report.

Please review your machines User’s Guide to learn of additional details. 
Using this Network Configuration Report, you can find your machine 
MAC address and IP address.

For example:

MAC Address     : 00:15:99:41:A2:78
IP Address         : 192.0.0.192

Firstly, you have to set up an IP address for network printing and 
managements. In most cases a new IP address will be automatically 
assigned by a DHCP (Dynamic Host Configuration Protocol Server) 
located on the network.

In a few situations the IP address must be set manually.  This is called a 
static IP and is often required in corporate Intranets for security reasons.
• DHCP IP assignment:  Connect your machine to the network, and 

wait a few minutes for the DHCP server to assign an IP address to the 
machine. Then, print the Network Configuration Report as explained 
above. If the report shows that the IP address has changed, the 
assignment was successful. You will see the new IP address on the 
report. 

• Static IP assignment: Use SetIP program to change the IP address 

from your computer.

In an office environment, we recommend that you contact a network 
administrator to set this address for you.

The following procedure is based on Windows XP. 

This program is for manually setting the network IP address of your 
machine using its MAC address to communicate with the machine. MAC 
address is a hardware serial number of the network interface and can be 
found in the Network Configuration Report.

Insert the driver CD provided along with your machine. When the 
driver CD runs automatically, close the window.

• You only need to run this program if your network requires a 

static IP address. Otherwise, you may proceed to the 
Configuring the machine’s wireless network part of this 
document. If you are unsure of this requirement ask the system 
administrator or the person who has set up your local network.

• You can only use the SetIP program when your machine is 

connected to a network or directly connected to a PC with the 
crossover network cable included with your machine.  In most 
cases we recommend using the crossover cable. You will be 
asked to connect this cable in a moment.

Start Windows Explorer and open the X drive. (X represents your 
CD-ROM drive.)

Double click Application > SetIP.

Double click Setup.exe to install this program. 

Click OK.
If necessary, select a language from the drop-down list.

Follow the instruction on the window to complete the installation.

Connect your machine and the computer using crossover network 
cable.

Temporarily disable the computer firewall before continuing by doing 
the following:

From the Windows Start menu, select All Programs > Samsung 
Network Printer Utilities

 > SetIP > SetIP.

Click on the 

icon(third from left) in the SetIP window to open 

the TCP/IP configuration window.

Enter the machine’s new information into the configuration window 
as follows:

• MAC Address: Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.

 MAC address is a hardware serial number of the machine’s 
network interface and can be found in on the Network 
Configuration Report

.

Window XP
• Open Control Panel.
• Double click Security 

.

• Click Windows Firewall.
• Disable the firewall.

Macintosh OS
• Open System Preferences.
• Click Sharing.
• Click the Firewall menu.
• Turn firewall off.