Samsung Wireless Mono Multifunction Printer Manual De Usuario

.6   

<Getting Started>

• IP Address: Enter a new IP address for your printer the same as the 

computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 
192.168.1.X. (X is number between 1 and 254 other than the 
computer’s address.)

• Subnet Mask: Enter this exactly the same as the computer’s Subnet 

Mask.

• Default Gateway: Enter this exactly the same as the computer’s 

Default Gateway.

Click Apply, and then click OK. The machine will automatically print 
the Configuration report. Confirm that all the settings are correct.

Click Exit to close the SetIP program.

If necessary, restart the computer’s firewall.

You can also set up the various network settings through the network 
administration programs.
• SyncThru™ Web Admin Service: Web-based printer management 

solution for network administrators. SyncThru™ Web Admin Service 
provides you with an efficient way of managing network devices and 
lets you remotely monitor and troubleshoot network machines from 
any site with corporate internet access. Download this program from

 

.

: Web server embedded on your network print 

server, which allows you to: (A) Configure the network parameters 
necessary for the machine to connect to various network environments. 
(B) Customize machine settings.

You can restore factory default settings to the machine by using 
SyncThru™ Web Service

. You may need to reset the machine to the 

factory default settings when machine that you are using is connected to 
new network environment.

Start a web browser such as Internet Explorer, Safari or Firefox and 
enter your machine’s new IP address in the browser window.
For example,

When the SyncThru™ Web Service window opens, click Network 
Settings

.

Click Reset. Then, click Clear for network.

Turn off and restart machine to apply settings.