Samsung Wireless Mono Multifunction Printer Manual De Usuario

.7   

<Getting Started>

Before starting you will need to know the SSID of your wireless network 
and the Network Key if it is encrypted. This information was set when the 
access point was installed. If you do not know about your wireless 
environment, please ask the person who has set up your network.

Before starting wireless parameter configuration, make sure cable 
connection status. 

Start a web browser such as Internet Explorer, Safari or Firefox and 
enter your machine’s new IP address in the browser window.
For example,

When the SyncThru™ Web Service window opens, click Network 
Settings

.

Click Wireless and Select Wizard. Then, click Next.

 will help you setup the wireless network 

configuration. However, if you want to set the wireless 
network directly, select Custom.

Select the one Network Name(SSID) in the list.

• SSID: SSID(Service Set Identifier) is a name that identifies a wireless 

network. Access points and wireless devices attempting to connect to 
a specific wireless network must use the same SSID. The SSID is 
case-sensitive.

• Operation Mode: Operation Mode refers to the type of wireless 

connections.
- Ad-hoc: allows wireless devices to communicate directly with each 
other in a peer-to-peer environment.
- Infrastructure: allows wireless devices to communicate with each 
other through an access point.

If your network’s operation mode is Infrastructure, select the 
SSID

 of the access point. If the operation mode is Ad-hoc, 

select the machine’s SSID. Note that “airportthru” is the 
default SSID of your machine.