Samsung SSA-S2000 Manual De Usuario

 

troubleshooting

troubleshooting

PROBLEM

ACTION

I can not register an additional user card 
(or PIN).

1)  Check if the product is installed properly and works normally.

       -  In the initial setup of the product or after it is initialized

Set the operation mode and register the Master card and user cards as usual 
because the product is in the initial state.

       

c

 SSA–2000 modes available : Mode Number + ENT

        

√

 RF Only      : 01 + ENT

        

√

 RF + P/W   : 02 + ENT

        

√

 PIN Only     : 03 + ENT

        

√

 RF or PIN    : 05 + ENT

       

d

  Master Card (or (PIN): 4 ~ 6 digits (Mode 03 or 05) + ENT)

       

e

  Enter the user card or PIN number and provide the password according to the 

mode

       

f

  Master Card (or (PIN): 4 ~ 6 digits (Mode 03 or 05) + ENT)

        

√

  For more information about registering the Master Card and the user card, 

refer to the initial setup section in the user manual.

2)   If this happens when you try to register an additional card in normal operation 

mode

       -  Register the user card only as the Master Card is already registered.

       

c

  Master Card (or (PIN): 4 ~ 6 digits (Mode 03 or 05) + ENT)

       

d

  Command for an additional card registration according to the operation mode

        

√

 RF Only      : 11 + ENT

        

√

 RF + P/W     : 12 + ENT

        

√

 PIN Only      : 13 + ENT

        

√

 RF or PIN     : 15 + ENT

       

e

  Enter the user card or PIN number and provide the password according to the 

mode

       

f

  Master Card (or (PIN): 4 ~ 6 digits (Mode 03 or 05) + ENT)

        

√

  For more information about registering the user card, refer to the additional user 

registration section in the user manual.

3)   If the problem persists after you have followed the procedures above, contact a 

designated service center.