HP dl385 Manual De Usuario

Software and configuration utilities 66

Select the ROM version.

Press the Enter key.

Press the Esc key to exit the current menu or press the F10 key to exit RBSU. The server restarts
automatically.

To access the redundant ROM manually:

Power down the server (on page

Set positions 1, 5, and 6 of the system maintenance switch to On.

Install the access panel (on page

Power up the server (on page

Wait for the server to emit two beeps.

Repeat steps 1 and 2.

Set positions 1, 5, and 6 of the system maintenance switch to Off.

Repeat steps 4 and 5.

When the server boots, the system identifies whether the current ROM bank is corrupt. If a corrupt ROM is

detected, the system boots from the backup ROM and alerts you through POST or IML that the ROM bank

is corrupt.
If both the current and backup versions of the ROM are corrupt, the server automatically enters ROMPaq

disaster recovery mode.

USB support

HP provides both standard USB support and legacy USB support. Standard support is provided by the

operating system through the appropriate USB device drivers. HP provides support for USB devices prior

to the operating system loading through legacy USB support, which is enabled by default in the system

ROM. HP hardware supports USB version 2.0.
Legacy USB support provides USB functionality in environments where USB support is normally not

available. Specifically, HP provides legacy USB functionality at:

•

POST

•

RBSU

•

Diagnostics

•

DOS

•

Environments which do not support USB natively

For more information on ProLiant USB support, refer to the HP website

(

Changing the USB version support

The factory default setting for this server is USB version 1.1. After the OS has loaded, this setting can be

changed to USB version 2.0 using the following steps:

Access RBSU by pressing F9 during power up.

Select System Options.