HP proliant dl580 Manual De Usuario
Removal and replacement procedures 26
3.
Remove the PPM.
IMPORTANT: Always install a PPM when you install a processor. The system fails to boot if the
corresponding PPM is missing.
To replace the component, reverse the removal procedure.
Removing a PCI latch
1.
Power down the server (on page
2.
Extend or remove the server from the rack ("
3.
Remove the access panel ("
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
expansion slots have either an expansion slot cover or an expansion board installed.
4.
Open the latch.
5.
Remove the expansion board from the slot, if installed ("
6.
Remove the expansion slot cover from the slot, if installed.