HP proliant dl580 Manual De Usuario

Removal and replacement procedures  27 

Remove the PCI latch by pushing up on the clear plastic piece of the PCI latch that extends below the 
chassis under the latch. 

 

To replace the component, reverse the removal procedure. 

 

Removing a PCI retaining clip 

Power down the server (on page 

Extend or remove the server from the rack ("

" on page 

Remove the access panel ("

  CAUTION:  To prevent improper cooling and thermal damage, do not operate the server unless all 

expansion slots have either an expansion slot cover or an expansion board installed.  

Open the PCI latch, and unlock the PCI retaining clip. 

Remove the expansion board from the slot, if installed ("

Remove the PCI retaining clip.