HP proliant dl580 Manual De Usuario

Removal and replacement procedures  34 

Using the lever, lift the system board slightly, and slide the system board out through the back of the 
server. 

 

  IMPORTANT:  If replacing the system board or clearing NVRAM, you must re-enter the server serial number 

through RBSU ("

To replace the component, reverse the removal procedure. 

 

Re-entering the server serial number and product ID 

After you replace the system board, you must re-enter the server serial number and the product ID. 

During the server startup sequence, press the F9 key to access RBSU. 

Select the Advanced Options menu. 

Select Serial Number. The following warning is displayed:   

Warning: The serial number should ONLY be modified by qualified service 

personnel. This value should always match the serial number located on 

the chassis.   

Press the Enter key to clear the warning. 

Enter the serial number. 

Select Product ID. The following warning is displayed. 

Warning: The Product ID should ONLY be modified by qualified service 

personnel. This value should always match the Product ID located on the 

chassis. 

Enter the product ID and press the Enter key. 

Press the Escape key to close the menu. 

Press the Escape key to exit RBSU.