HP proliant dl580 Manual De Usuario
Server component identification 84
•
If only one hard drive is used, install it in the bay with the lowest number.
•
Hard drives must be SFF types.
•
Drives must be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
grouped together into the same drive array.
NOTE: ACU does not support mixing SAS and SATA drives in the same logical volume.
SATA or SAS hard drive LEDs
Item LED
description
Status
1
Fault/UID status
Amber = Drive failure
Flashing amber = Fault-process activity
Blue = Unit identification is active
Off = No fault-process activity
2
Online/Activity status
Green = Drive activity
Flashing green = High activity on the
drive or drive is being configured as part
of an array
drive or drive is being configured as part
of an array
Off = No drive activity
SAS and SATA hard drive LED combinations
Online/activity
LED (green)
LED (green)
Fault/UID LED
(amber/blue)
(amber/blue)
Interpretation
On, off, or
flashing
flashing
Alternating amber and
blue
blue
The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a
management application.
received for this drive; it also has been selected by a
management application.
On, off, or
flashing
flashing
Steadily blue
The drive is operating normally, and it has been selected by a
management application.
management application.
On
Amber, flashing
regularly (1 Hz)
regularly (1 Hz)
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.