Sony har-lh500 Manual De Usuario

You can convert tracks recorded in the linear
PCM format (factory setting) to the ATRAC3
format.  By doing so, the recorded data will be
compressed and the recordable time on the
HDD will be extended.

Before the operation, press HDD or press CD/
HDD on the recorder to light up the HDD
indicator.

“PCM 

t ATRAC3?” appears in the

display.

“PCM 

t ATRAC3??” appears again.

Converting starts and the percentages of
current status appears in the display.

When it finishes, “Complete” appears in the
display.

• If the selected track is in the linear PCM format, the

conversion will take about half the playing time of
that track.  If you select an album with many linear
PCM-format tracks, the conversion will take about
half the total playing time of all of the linear PCM-
format tracks.

• You cannot convert MP3- or ATRAC3-format

tracks.

If you choose an album for conversion, only tracks
recorded in linear PCM format are converted.

You can set the recorder so that it turns off
automatically after a specified duration.

“SLEEP” appears in the display.

• You can use the ALBUM dial on the recorder

instead of the 

<, ,, or ENTER button on the

remote to select and enter items in Edit Menu or
Setup Menu.
To select an item:  Turn the ALBUM dial towards
+/–.
To enter a selection:  Press the ALBUM dial.

• You can also use the ALBUM +/– buttons instead of

the 

</, buttons to select items in Edit Menu or

Setup Menu.

“Edit Menu” appears in the display.
When the recorder is set to CD by pressing the
CD button, “Setup Menu” appears in the display.
In this case, go to step 3.

<

,

“Setup Menu” appears in the display.

<

,

<

,

“SLEEP” appears in the display.

You can check the remaining time.  Once you turn on
Sleep Timer, the remaining time is displayed when
you select “Sleep” in Setup Menu.