Toshiba dynadock pa3686u-1set Manual De Usuario

31

When your computer is docked, the audio ports on the computer are 
automatically disabled and the audio ports on the dynadock™ are 
automatically enabled. In most cases, simply connect your audio 
device to the appropriate port on the dynadock™ and the port is 
ready to use. To do any one of the following, please see the 
referenced section:

❖

To use the computer’s audio ports (instead of the dynadock's 
audio ports) when the computer is docked, please see 

.

❖

To enable virtual 7.1-channel sound on your connected audio 
device, please see 

. This 

will provide better sound quality over standard stereo output.

❖

To use the dynadock’s S/PDIF jack, please see 

If you switch between the computer's audio ports and the dynadock's 
audio ports, you may have to restart your media player if it is 
running.

The dynadock™ provides six USB 2.0 ports: four on the back and 
two on the front. To locate the USB ports on the dynadock™, 
please see the 

. 

This section provides basic instructions for connecting most USB 
devices to the dynadock™. Please check the documentation that 
came with your USB device for any special instructions.

You do not need to turn off the dynadock™ or the docked computer 
before connecting a USB device.

To connect a USB device to the dynadock™:

If your device came with its own AC adaptor, connect the AC 
adaptor to the device and to a live electrical outlet.

Use a USB cable to connect the device to one of the USB ports 
on the dynadock™.