Digidesign 2 Manual De Usuario

Digital Audio Connections in 
Stand-Alone Mode

Digital Inputs

In Stand-alone mode, you can set Inputs 5–6 to 
accept S/PDIF digital input instead of analog in-
put. 

When Inputs 5–6 are set to S/PDIF, the 1/4-inch 
analog connectors for Inputs 5–6 (on the back 
panel of Digi 002) are inactive. 

To set Inputs 5–6 to S/PDIF digital input:

1  

In Stand-alone mode, press the Utility (F1) 

switch. 

2  

Press the illuminated Channel Select switch 

under Pref.

3  

Press the illuminated Channel Select switch 

under In56 (Inputs 5–6).

4  

Press the illuminated Channel Select switch 

repeatedly to toggle Inputs 5–6 to Analog or 
S/PDIF.

5  

Press the Escape (Esc) switch to exit Input 5–6 

preferences.

6  

Press the far right-hand Channel Select switch 

to save the preference settings. 

7  

Press the Escape (Esc) switch twice to exit Util-

ity mode. 

Digital Input Format

You can set Digi 002 to receive S/PDIF input at 
the RCA Input connector or the Optical Input 
port on the back panel of Digi 002. See “Digital 
Audio Connections” on page 47 for details on 
S/PDIF input format. 

In Stand-alone mode, the RCA and Optical ports 
accept S/PDIF signals at sample rates up to 
48 kHz.

To change the digital input format for Inputs 5–6:

1  

In Stand-alone mode, press the Utility (F1) 

switch. 

2  

Press the illuminated Channel Select switch 

under Pref.

3  

Press the illuminated Channel Select switch 

under SPDF (S/PDIF).

4  

Press the illuminated Channel Select switch 

repeatedly to toggle the digital format to RCA or 
Optical.

5  

Press the Escape (Esc) switch to exit SPDF pref-

erences.

6  

Press the far right-hand Channel Select switch 

to save the preference settings. 

7  

Press the Escape (Esc) switch twice to exit Util-

ity mode. 

RCA S/PDIF
Input 

Optical 
Input port