Digidesign 2 Manual De Usuario
Chapter 7: Using Digi 002 as a Stand-Alone Mixer
87
6
Press the far right-hand Channel Select switch
to save the preference settings.
7
Press the Escape (Esc) switch twice to exit Util-
ity mode.
Views in Stand-Alone Mode
In Stand-alone Mode, Digi 002 can display the
mixer controls in several views.
mixer controls in several views.
Home View
Home View is the default mixer view that you
see when you first enter Stand-alone Mode. This
view is actually the same as Console View with
the Pan controls displayed on the Rotary Encod-
ers, and channel names on the Channel Scribble
Strips.
see when you first enter Stand-alone Mode. This
view is actually the same as Console View with
the Pan controls displayed on the Rotary Encod-
ers, and channel names on the Channel Scribble
Strips.
To put Digi 002 in Stand-alone Home View:
■
In Stand-alone Mode, press the Pan switch in
the upper left-hand corner of the Console View
area.
area.
Console View
Console View lets you toggle the Digi 002 to dis-
play either the pan position controls or the send
controls for each channel.
play either the pan position controls or the send
controls for each channel.
Pan View
This is the default mixer view that ap-
pears when you first enter Stand-alone mode. In
Pan View, the faders control Input channel vol-
ume and the rotary encoders control pan posi-
tion.
Pan View, the faders control Input channel vol-
ume and the rotary encoders control pan posi-
tion.
In this view, the Channel Scribble strips show
the channel names. Channel names can be
changed in this view. (See “Naming Channels”
on page 90.)
the channel names. Channel names can be
changed in this view. (See “Naming Channels”
on page 90.)
To display pan position for all channels:
■
In Stand-alone Mode, press the Pan switch in
the upper left-hand corner of the Console View
area.
area.
Send View
This view displays the send level con-
trols for each track on the rotary encoders. In
Send View, the faders continue to control Input
channel volume.
Send View, the faders continue to control Input
channel volume.
In Send view, the Channel Scribble Strips show
the names associated with each send position
(Send A=Dly, Send B=Rvrb, Send C=Snd C,
Send D=Snd D in Stand-alone Mode) across all
channel strips.
the names associated with each send position
(Send A=Dly, Send B=Rvrb, Send C=Snd C,
Send D=Snd D in Stand-alone Mode) across all
channel strips.
To display send level controls for all channels:
1
In Stand-alone Mode, press the Send switch in
the upper left-hand corner of the Console View
area.
area.
2
Press any of the Send Position switches (A–D)
to display the levels for the corresponding send
in the rotary encoders. (In Stand-alone Mode,
the switch for Send E is inactive.)
in the rotary encoders. (In Stand-alone Mode,
the switch for Send E is inactive.)
When you are displaying individual sends in
Send view, the Channel Select switches toggles
the send between pre- and post-fader operation.
Send view, the Channel Select switches toggles
the send between pre- and post-fader operation.
When you first display sends, the send names
are shown in the Channel Scribble Strips. To see
the send level value in a Scribble Strip, move its
Rotary Encoder. By default, send levels are
turned all the way down (– INF).
are shown in the Channel Scribble Strips. To see
the send level value in a Scribble Strip, move its
Rotary Encoder. By default, send levels are
turned all the way down (– INF).